Inserting a zipper, Inserting a zip, 01 hi – SINGER 6217 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
Inserting a zipper
We recommend using the Zip Foot to form
an even line of stitching close to the zipper.
Recommended settings
Stitch Selection:
Straight Stitch no. 2
Needle Position:
UIU
Stitch Width:
01 Hi
Stitch Length:
2-5
Foot:
Zipper (E)
Needle Plate:
General Purpose (A)
When the zipper teeth are to the left of the
needle.
• Slide the adjusting block, (1) which slides
on the pin, across to the right.
• Snap on the foot to the left side of the pin.
(See changing snap-on presser feet.)
• Check the position of the foot by lowering
the needle into the notch on the side of
the foot, to ensure that it clears the foot.
When the zipper teeth are to the right of the
needle.
• Slide the adjusting block, (1) across to the
left.
• Snap-on the foot to the right side of the
pin. (See changing snap-on presser feet.)
Check the position of the foot by lowering
the needle into the notch on the side of
the foot, to ensure that it clears the foot.
19