Maytag MC2 - Manual (Page 28)

Manually Operated Automatic Mode
1. When turning on power, or when no cycle is in progress, the L.E.D. display will read "FILL".
2. Press key number 2.
3. Select cycle drying temperature. Display will read "F—". Enter the drying temperature required in the three
blank spaces. Press enter/start key.
4. Select number of dryness levels. Display will read "d—". Enter dryness levels required in the three blank
spaces. Press enter/start key.
5. (For reversing dryers in select reverse mode only). Display will read "Sr—". Press enter/start to begin a
reversing cycle and 0 to begin a non-reversing cycle.
6. Once the pre-programmed drying time and cool down period have been reached, the tone will sound and the
display will have read "donE", at which time the dryer will shut off.
a. NOTE: If the anti-wrinkle program is active, the display will continue to read "donE", and the
computer will proceed through the anti-wrinkle program until the maximum Guard On
lime has expired or until the door is opened, whichever, comes first. The display will
read "FILL".
b. NOTE: If the anti-wrinkle program is not active or in use, the display will read "donE" until the
door is opened.
Pre-Programmed Cycles
ALL programming for the pre-programmed cycles is already complete. Simply press the letter on the keyboard
corresponding to the cycle desired (A through F) and the cycle will begin.
These pre-programmed cycles are set in A, B, and C. Keys D, E, and F are manually loaded cycles. See the
User's Manual for further detail.
NOTE: The anti-wrinkle program will operate identical to manually entered programs.
24