SINGER 9134 - Manual (Page 19)

SELECTING A PATTERN
All the patterns your machine is capable of sewing are illustrated on the pattern display
panel of your sewing machine.
• Select a pattern by turning the selector
dial until indicator appears under desired
pattern.
For instance, to sew a Zig-Zag Stitch,
you would turn the selector dial until
the indicator appears as (1).
To change the stitch pattern, turn the
dial left or right, moving indicator to
desired position.
With each application, recommended settings are given. These have been highlighted for
easy Identification. You can adjust each setting, however, as desired.
SECTION 3
STRAIGHT STITCHING
The Straight Stitch Needle Plate (C) and Presser Foot (D) help prevent skipped stitches
and control fabric when straight stitching around a curve or close to the fabric edge.
CAUTION: Straight Stitch Needle Plate
and Presser Foot should be used for
straight stitch sewing only.
Always change back to the appropriate
needle plate and presser foot when not
straight stitching.
RECOMMENDED SETTINGS
Stitch Selection: Straight Stitch
1
Stitch Width: i
^
1
^ ^
1 1/2 to 4 Stitch Length:
Foot:
Straight Stitch (D)
Needle Plate: Straight Stitch (C)
ADJUSTING STITCH LENGTH
The stitch length indicator is numbered
0 - 4. The lower numbers are shorter
stitches. Shorter stitches are best for light­
weight fabrics; longer ones for heavy
fabrics. To adjust the length of your
stitches, slide the stitch length lever to
the left or right.
17