SINGER 9210 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING THREAD TENSID
ADJUSTING STITCH LENGTH
Move lever (1) up or down to
adjust thread tension.
Auto position suits most
sewing applications.
Too much tension -
Move lever up.
Too little tension -
Move lever down.
ADJUSTING STITCH WIDT
Move lever (2) to widen or
narrow stitch.
When using twin-needle do not
set
width
wider
than
twin-
needle graphic. I
For more density (shorten stitch)
move lever (3) to left.
For less density (longer stitch)
move lever (3) to right.
When stitches are too close
(4) - move lever (1) to the
left.
When stitches are too far
apart (5) - move lever (1) to
the right.
Swing accessory box to back
of machine or remove by
lifting.
Cuffs, sleeves or waistbands
will fit easily on free arm.
-
12
-