Circular pattern stitch – SINGER XL1000 Quantum User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Circular Pattern Stitch
1
Select pattern as desired.
sewing outside
periphery of coasters
and emblems.
Circular ruler allows
machine to sew circular
patterns of 3 to 10cm
radius.
Select patterns from Pattern If single Pattern is selected
category
I Attach decorative
.stitch foot (T).
IK )
press B key.
3
Attach circuiar pattern
stitching ruler.
Left-hand side:
Suited to sewing of large circular
patterns
Right-hand side;
Suited to sewing of small
circular patterns
Move sizing lever
4
by firmly pushing
from slot.
5
Move sizing plate
to desired position.
Attach circular pattern stitching
ruler to left- or right-hand side of
Needle plate using screw supplied
with machine.
6
Push sizing lever
into slot.
Place material on machine and
p hold in position using tack
supplied with machine.
NOTE: Symmetrical patterns such as bead ( # ) will sew Identical
whether circular pattern stitching ruler is attached to the left hand
or right hand side of the needle.
Nonsymmetrical patterns such as crescent ( 1 ) will sew the
mirror Image depending on attachment to left or right side of
needle. Patterns can be modified (see page 47)
54