Asus P55SP4 - Manual (Page 62)

Software Guide
There is a line at the bottom of the screen "Press ESC To Exit".
If you press the Escape key the program will terminate and re­
turn you to the DOS prompt.
If you type a "3" and then press the "Enter" key the Advanced
Features screen will appear.
The Advanced Features Screen
Advanced Features
Flash Type -- SST 29EE010
Current BIOS Revision: #401X0-0103
Choose one of the following:
1. Clear PNP ESCD Parameter Block
2, Update BIOS Including Boot Block and ESCD
Enter Choice; [2]
Press ESC To Exit
There are two command options which you invoke by typing the
number of the command and pressing the "Enter" key:
1. Clear PNP ESCD Parameter Block
This command erases the Plug and Play configuration record.
2. Update BIOS Including Boot Block and ESCD.
This updates the Boot Block, the BIOS and the Plug and Play
ESCD Parameter Block from a new file in the FLASH directory.
Operation and controls are the same as for the main screen.
3 - 3 3