NETGEAR wndr3700 - Manual (Page 31)

RangeMax™ Dual Band Wireless-N Gigabit Router WNDR3700 User Manual
Safeguarding Your Network 2-9
v1.3, October 2009
Configuring WEP Wireless Security
To configure WEP data encryption:
1. Log in to the wireless router at its default LAN address of http://www.routerlogin.net with
its default user name of admin, and default password of password, or using whatever
password and LAN address you have chosen for the wireless router.
2. From the main menu, select Wireless Settings to display the Wireless Settings screen.
• WPA/WPA2 Enterprise. Allow computers configured with either
WPA-PSK or WPA2-PSK security to connect to the wireless
router. When you select this option, this additional area appears
on your screen:
Security Options (WPA/WPA2 Enterprise)
• WPA Mode. Select the WPA Mode from the drop-down
list (WPA [TKIP], WPA2 [AES], or WPA [TKIP + WPA2
[AES]).
• RADIUS server IP Address. Enter the IP address of the
RADIUS server.
• RADIUS server Port. The RADIUS server port number is
listed in this field.
• RADIUS server Shared Secret. Enter the Shared
Secret.
Note: If you use a wireless computer to configure wireless security settings, you will be
disconnected when you click Apply. Reconfigure your wireless computer to match
the new settings, or access the wireless router from a wired computer to make
further changes.
Note: On this screen, you specify wireless settings for both wireless networks: the 2.4
GHz and the 5 GHz.
Table 2-1. Wireless Settings (continued)
Settings Description