Yaesu FT-60R - Manual (Page 38)

R. G. Sparber KG7MQL February 22, 2015 Page 38 of 52
Memory Mode: Removing Memories from a Memory
Bank [34]
I would call this function "Removing Channel pointers from a Memory Bank".
This function should not be confused with deleting the actual Channel data (page
38).
This function is the twin of adding Chanel pointers
to a Memory Bank (see page 36).
1. Move to the Bank containing the Channel
pointer you wish to remove (see page 37)
2. Press and hold down the BANK key until you
see SEL flashing and BANK followed by a
number. This should be the Bank you have
selected.
3. Within 3 seconds, press F W and hold it down
until you hear a beep.
4. The selected Channel pointer has now been
removed from this Bank.
Removing Memories from a Memory Bank: BANK/FW
Memory Mode: Memory Only Mode [34]