Aussie LP 7462 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP 10-INSTALL BOTTOM BODY PANEL/GRBASE TRAY- (ALL MODELS)
•In upright position and drain hole
toward the rear, slide Bottom Body
Panel into guides (See Arrows) at
bottom of Grill Body. Insert two
#8
x
1
/
2
” screws through the holes in
guides and Bottom Body Panel; then
tighten. Slide Foil Pan and Grease
Tray all the way into Bottom Body
Panel Brackets.
m
X 1/2” SCRE
(2pcs)
BOTTOM BODY PANEL
FOIL PAN
GREASE TRAY
STEP 11-iNSTALL CERAMIC BRIQUETTE TRAYS & GRIDS - (ALL MODELS)
•Remove plastic completely from two Ceramic Briquette Trays. Place side by side on middle shoulder
of front and rear firewall over the Burners.
•Place two Cooking Grids side by side on upper shoulder of front and rear firewall over the Ceramic
Briquette Trays.
CERAMIC
BRIQUETTES
MIDDLE SHOULDER
UPPER SHOULDER
20