Connections, Eiefore connecting the ac cord, Important – Aiwa LCX-350 User Manual
Page 4: 2 connect the supplied antennas, 3 connect the ac cord to an ac outlet, 1 connect the speaker cords to the main unit, Connections o
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
This system may be powered by an AC voltage or car battery
(OC 12 V) power source. (Aiwa DCW-50 car battery cord is
available as an optional accessory. For details, please refer to
page 17.)
Eiefore connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
• Connect the speakers, antennas, and all optional equipment
first. Then connect the AC cord or car battery cord in the end.
• There are no differences between the front speakers. Both
speakers can be connected as L (Left) or R (Right).
2 Connect the supplied antennas.
Connect the FM antenna to the FM 75 Q terminals and the
AM antenna to the AM LOOP terminals.
AM LOOP antenna
3 Connect the AC cord to an AC outlet.
1 Connect the speaker cords to the main unit.
The cords with the white stripes should be connected to the
© terminals and the other cords to the © terminals.
Do not short-circuit the O and © speaker cord leads, otherwise
the sound may become inaudible or the unit may be turned off.
If this happens, disconnect the AC cord from the AC outlet and
re-connect the speaker cord correctly. Connect then the AC cord
and turn the unit on again.
3
ENGLISH