DeLorme PN-20 - Manual (Page 71)

70
To Modify the Sound Settings
To modify the device’s button press sound, message sound, power sound, turn alert sound, and/
or the volume of all sounds, from the Device Setup Page, highlight the Sound option and press
ENTER. Press QUIT at any time to return to the Device Setup Page.
• To modify the button press sound, highlight the Button Press drop-down list and press EN-
TER. Highlight the sound type you want and press ENTER.
• To modify the message sound, highlight the Message drop-down list and press ENTER. Then,
highlight the sound type you want and press ENTER.
• To modify the Power sound, highlight the Power drop-down list and press ENTER. Then,
highlight the sound type you want and press ENTER.
• To modify the turn alert sound, highlight the Turn Alert drop-down list and press ENTER.
Then, highlight the sound type you want and press ENTER.
• To modify the volume of all sounds, highlight the Volume slider control and press the arrow
keypad to the right to increase the volume (or to the left to decrease the volume).
• To mute the sound, highlight the Mute field and press ENTER. Note: This does not mute the
warning sound when power is critically low. To enable sound again when the check box is
selected, highlight the Mute field and press ENTER to clear the check box.
Sound menu options