Daewoo DF-8100P - Manual (Page 13)

SETUP
23
Set Clock
1
Follow steps 1-2 as shown under ‘Manual Set’.
2 Use […/†] to select ‘Set Clock‘.
3 Press [ENTER]. The ‘Set Clock’ menu appears.
4 Enter the date and time.
œ /√ (left/right): Moves the cursor to the previous or next column.
…/† (up/down): Changes the setting at the current cursor position.
5 Press [ENTER] to confirm your setting, then press [SETUP] to exit the Setup
menu.
Auto Set
The DVD Recorder+VCR has a frequency synthesized tuner capable of receiving
up to 119 channels. These include VHF channels 2-20, 74-80, UHF channels 21-
69 and CATV channels 1-41.
Preparation:
Connect the DVD Recorder+VCR to the desired type of antenna or cable TV
system, as shown in ‘Connecting Antenna/Cable‘ on page 15.
1
Follow steps 1-2 as shown under ‘Manual Set’.
2 While ‘Installation‘ is selected, press […/†] to select ‘Auto Set‘.
3 Press [ENTER] to begin the channel search.
The tuner will automatically search for all available channels in your area
and place them in the tuner’s memory.
• After Auto Set is complete, follow the instructions above to make sure that
Tuning Band is set correctly.
Installation
Searching for available TV stations:
5 channels found
Please wait...
Instructions
Setup-Exit
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions
Enter-Confirm Setup-Exit
Move …†
Installation
Manual Set
Auto Set
Set Clock
Adjust Channels
Instructions
Enter-Confirm Setup-Exit
Move …†
Set Clock
Please set the clock:
Time : 12 : 00
Date : 02 \ Jan \ 2010 (Sat)
Instructions
Enter-Confirm Setup-Exit Move …†
…
†
22
9 Use […/†] to select ‘Auto Search‘.
10
Search the real channel number by pressing [œ/√].
11 Select ‘Fine Tune’. You can adjust the fine tuning.
12 Use […/†] to select ‘Decoder‘. Press [ENTER] to move to the second
level.
13 When the program is encoded (and you have a decoder connected to
socket EURO AV2), press […/†] to select ‘On’ and press [ENTER] to
confirm.
14
Use […/†] to select ‘Store‘. Press [ENTER] to move to the second
level.
15
Use […/†] to select program number to store and press [ENTER] to
confirm.
16
Use […/†] to select ‘Program Name‘. Press [√] to move to the second
level. If your DVD Recorder+VCR is showing no station name or is
showing a station name incorrectly, you can correct this.
17
Either select the name from the stored list or you create the station
name and enter a 4-digit name. Change the letters with the […/†],
move the next letter with the [œ/√].
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Select Decoder
State
Off
On
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Select Channel
To Store
PR99
Manual Setup
Standard PAL-BG
Reception Aerial
Auto Search CH02
Fine Tune
Decoder
Off
Store PR01
Program Name P-01
Instructions
Enter-Confirm Setup-Exit Move …†
Edit Channel
Name
P – 0 1
Initial Setup Initial Setup