3DLABS Wildcat II 5110 - Manual (Page 8)

Introduction
3Dlabs Graphics Accelerator Card User's Guide 2
tÉäÅçãÉ=íç=Paд~Дл> tÉäÅçãÉ=íç=Paд~Дл> tÉäÅçãÉ=íç=Paд~Дл> tÉäÅçãÉ=íç=Paд~Дл>====
Thank you for selecting a 3Dlabs
®
Wildcat
®
II 5110 Graphics Accelerator Card!
This User Guide is designed to provide information about the Wildcat II 5110 Graphics Accelerator Card.
In addition to this guide you are strongly encouraged to use the on line help included in the 3Dlabs driver
software Help screens.
póëíÉã=oÉèìáêÉãÉåíë= póëíÉã=oÉèìáêÉãÉåíë= póëíÉã=oÉèìáêÉãÉåíë= póëíÉã=oÉèìáêÉãÉåíë=====
You must have Microsoft Windows NT 4.0 with Service Pack 5 (or later) or Windows 2000 installed. To
take advantage of the dual-screen option, you must have Windows 2000 installed.
· Pentium II®or greater processor
· Microsoft® Windows® NT 4.0 with Service Pack 5 (or later) or Windows 2000
· AGP Pro 50 expansion slot
· One open PCI slot adjacent to the AGP Pro 50 slot
· Minimum of 32 MB DRAM (64 MB recommended)
· Industry-standard, multiple-frequency monitor (VGA) or a Digital Video Interface (DVI)-compliant digital
display device
· 3 MB of free space on the computer’s primary system disk for the video display driver software
Note: If you purchased the Wildcat II 5110 Graphics Accelerator Card as part of a system, it was
preconfigured to operate in your system prior to shipment. No other modifications are necessary. Also,
your system’s video drivers were installed prior to shipment and are operative when you receive the
system. No further installation or configuration is necessary unless you purchased a customer kit or need
to reinstall your video card. Store the driver delivery media that came with your system in a safe place in
case you ever need to reinstall the drivers.
For more detailed information on the operating system, refer to the printed and online documentation
delivered with the system.