3DLABS Oxygen 402 - Manual (Page 13)

Installation and User’s Guide
7
3. Now select your CD-ROM drive by double clicking on the
appropriate icon, usually
D:\. The contents of the CD-ROM are
displayed.
4. Double-click on the DRIVERS folder. This will display the
operating systems and platforms that the drivers support
(Figure 2).
5. Choose the correct driver for installation. If you are using a DEC
Alpha machine, then double-click on the
ALPHA40 folder. If you
are using an Intel system, double-click on the INTEL40 folder.
Figure 2: Drivers Folder