Dansons V-50 - Manual (Page 10)

Can adian Comfort Industries V05 10 VULCAN “V” SERIES OWNERS MANUAL
Copyright 2005 www.salesunlimited.com Dansons Group Inc.
I
NSTALLATION
O
PTIONS
READ THIS ENTIRE MANUAL BEFORE YOU INSTALL AND USE YOUR
VULCAN “V” SERIES HEATER. FAILURE TO FOLLOW INSTRUCTIONS MAY
RESULT IN PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH!
(See specific Installation details for clearances and other installation requirements)
The two VULCAN “V” SERIES models are the: “FPP” Freestanding: a Traditional styled stove mounted on a
pedestal (figure 1) or Leg platform (figure 2), and a Bay View style(figure 3); and the “IPP” Fireplace Insert /
Built-In: a Traditional style (figure 4), and a Bay View style (figure 5). Both models are available in black, pewter or
gold plated doors, legs, and louvers.
All models may be installed to code in both conventional and mobile homes.
INSTALLATION OPTIONS INCLUDE:
1. A FREESTANDING STOVE: Set on a pedestal or legs and placed on a non-combustible floor pad. (figure 1,2 & 3)
2. An ALCOVE: Set on a pedestal and placed on a non-combustible floor pad in compliance with clearance
requirements for an installation in an alcove. (figure 1, 2 & 3)
3. A HEARTH STOVE: When installed with or without a pedestal on a non-combustible hearth of a masonry or
factory built wood or coal burning fireplace. (figure 1,2 & 3)
4. A FIREPLACE INSERT: When installed, with a shroud, in a masonry or a factory built, wood or coal burning
fireplace. (figure 4 & 5)
5. A BUILT-IN INSERT: When installed on a non-combustible pad, in a wall or custom built mantel and where
adequate airflow around the stove is provided. (figure 4 & 5)