Clay Paky ALPHA SPOT HPE 700 - Manual (Page 27)

27 ALPHA SPOT HPE 700
Continue
➔
085529/001 085522/001
085533/001
085531/001
085516/001
085507/001
240106/801
2
1
17
Gobo orientation - Fig. 18
The pictures shown the correct gobos orientation.
Replacing rotating gobos (ø 25.7 mm - max 23 mm image – thickness max 1.1 mm) - Fig. 17
IMPORTANT: Use only glass gobos on the rotating gobos wheel.
WARNING: Before using personalised gobos contact Clay Paky.
GOBO DI VETRO DICROICI TIPO 1 GOBO DI VETRO DICROICI TIPO 2
18
To determine which side of a godo is coated, hold an odject up to it. On the
uncoated side, there is a space between the object and its reflection.
COATED GLASS GOBOS TYPE 1 COATED GLASS GOBOS TYPE 2
Grey/Black side
away from lamp
Coated side towards lamp
Coated side
Uncoated side
Uncoated side
Reflective side towards lamp
Periodical cleaning - Fig. 19
To ensure optimal operation and performance for a long time it is essential to periodically clean the parts subject to dust and grease deposits. The
frequency with which the following operations are to be carried out depends on various factors, such as the amount of the effects and the quality of the
working environment (air humidity, presence of dust, salinity, etc.).
Use a soft cloth dampened with any detergent liquid for cleaning glass to remove the dirt from the reflectors, from the lenses and filters. It is recommended
that the projector undergoes an annual service by a qualified technician for special maintenance involving at least the following operations:
• General cleaning of internal parts.
• Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky.
• General visual check of the internal components, cabling, mechanical parts, etc.
• Electrical, photometric and functional checks; eventual repairs
.
Upper Side
19
Parts requiring frequent cleaning.