DICE Electronics DOU VW - Manual (Page 21)

21
SAT Emulation: Basic Operation and Settings (DUO-103-AVW)
● Set your radio to the SAT (satellite radio) source by pressing the radio source selector to select the
Silverline DUO.
● Select the DUO audio source: Within the first 10 seconds of selecting the DUO press SEEK/TRACK UP or
DOWN to cycle through:
“AUX” or “SIRIUS” - Listen to an auxiliary audio device or listen to and control SIRIUS tuner connected
to DUO module. AUX requires optional cable.
“iPod” - Listen to and control iPod
“SAT” - Listen to and control factory satellite radio tuner (if available)
NOTE: To select a different DUO audio source during playback, the head unit must be turned off and back on again!
Silverline DUO Interface Settings (available within first 5 seconds of selecting Silverline DUO):
Select PRESET 1 to apply settings and resume audio playback.
Select PRESET 3 to change default volume level; use track up/down to adjust between Min and Max
Select PRESET 4 to enable/disable scrolling text.
Select PRESET 6 to view Silverline DUO serial number and firmware version.
PRESET 2 and 5 have no settings available.
Note: if the iPod is unlocked for direct control, radio control will be limited to songs, playlist and albums. Text display will
also be limited to show only current song information. It will not show the name of Playlist / Artist / Album.
SA
T Emulation