D-Link DES-3226 - Manual (Page 141)

DES-3226 NWay Standalone Fast Ethernet Switch User’s Guide
• Time Interval [1s ] – Select the desired setting between 1s and 60s, where “s” stands for
seconds. The default value is one second.
• Record Number [200 ] – Select number of times the Switch will be polled between 20 and 200.
The default value is 200.
• ExDefer – Counts the number of frames for which the first transmission attempt on a
particular interface was delayed because the medium was busy.
• CRCError – Counts otherwise valid frames that did not end on a byte (octet) boundary.
• LateColl – Counts the number of times that a collision is detected later than 512 bit-times into
the transmission of a packet.
• Show/Hide – Check whether or not to display ExDefer, CrcError, and LateColl errors.
• Clear – Clicking this button clears all statistics counters on this window.
• View Table – Clicking this button instructs the Switch to display a table rather than a line
graph.
• View Line Chart – Clicking this button instructs the Switch to display a line graph rather than a
table.
Size
The Web Manager allows packets received by the Switch, arranged in six groups, to be viewed as either
a line graph or a table. The two windows offered are as follows:
131