Technical specs – Dv Mark DV AC101 User Manual
Page 8
TECHNICAL SPECS
8
INPUTS:CHANNEL 1
Imp. 500 Kohm / max Vpp: 10
CHANNEL 2
Imp. 500 Kohm / max Vpp: 10
BALANCED CH2
Imp. 500 Kohm / max Vpp: 20
RETURN
Imp. 33 Kohm / Max 10Vpp
CONTROLS CH1
:GAIN
-45dB ÷ 28 dB
EFFECT MIX Internal Effect only
EQUALIZER
LOW: Level ±16 dB (40 Hz)
MID: Level ±16 dB (600Hz)
HIGH: Level ±16 dB min (6 KHz)
CONTROLS CH2
:GAIN
-43dB ÷ 26 dB
PHANTOM
48VDC
EFFECT MIX Internal Effect only
EQUALIZER
VPF: Center Freq. (380 Hz=
LOW: Level ±16 dB (60 Hz)
HIGH: Level ±16 dB min @ (5 KHz)
OTHER CONTROLS:
PHASE
0°, 180°
ANTIFEEDBACK 20Hz (off), 400 Hz
OUTPUTS
SEND
unbalanced, Max Voltage 20Vpp (Pre Eq)
TUNER OUT
unbalanced, Max Voltage 2Vpp
SEND MIX
balanced, Max Output: 20 Vpp
POWER OUT 150W/8 ohm - 250W/4 ohm
SUPPLY
100/120V/230V/240V 50/60Hz
(Version set inside the equipment)
Effects Description
1) Chorus + Reverb
2) Hall – Reverb time Medium High
3) Hall – Reverb time Medium
4) Room – Reverb time Medium High
5) Room – Reverb time Medium
6)
Chorus
SPEAKER
1x10"
TWEETER
1" HF compression driver
BASS PORT
rear
IMPEDANCE
8 ohms
SENSITIVITY
101 dB SPL
SPEAKER POWER HANDLING
200W RMS (AES Standard)
AMP OUTPUT POWER
(analog) 250W @ 4 ohm / 150W @ 8 ohm
FREQUENCY RESPONSE
45 Hz to 20 kHz
CROSSOVER FREQUENCY
3.5 kHz