Echelon i.LON 1000 Internet Server - Manual (Page 12)

8
i .LON 1000 Internet Serve Starter Kit
Hardware Installation
Recall the LonPoint hardware installation described on pages 2-15 and 2-16 of Getting
Started with the L
ON W ORKS System Starter Kit. You will expand the hardware
installation to include the
i
.LON 1000 Internet Server. The final topology is shown in
figure 2.1. A picture of the actual components is shown in figure 2.2
Figure 2.1 Final Installation Topology
Figure 2.2 Photograph of the Working Configuration
LonPoint
power supply
i .LON 1000
power supply
i .LON 1000
L ON W ORKS network
connection to PCC-10 card
(or PCLTA-10 if you are
using a desktop PC)
L ON W ORKS devices
(LonPoint modules)
TCP/IP network. 10BaseT
cables connect the
i .LON
1000 and the PC through a
10 BaseT hub. In a real
system other IP devices (PCs,
printers, servers, etc.) would
also connect to the hub.
L ON W ORKS network
connection to
i .LON 1000
PC connects to TCP/IP via
10BaseT connection, and to
L
ON W ORKS through an FTT-10
connection. All LonMaker
information is sent over the
L ON W ORKS connection, web
pages are read over the TCP/IP
connection.
10 BaseT hub
Netscape or
Internet Explorer
DIO AO
FTT-10
10BaseT
AI
LonMaker™ for
Windows
Ethernet 10BaseT Hub
i .LON 1000