Eurocom Racer 4W - Manual (Page 180)

Upgrading The Computer
6 - 18 Upgrading the Hard Disk Drive(s)
6
Removing the Hard Disk from the Secondary HDD Bay (Model B)
Note that the secondary hard disk (Model B if installed) is located under the optical
device bay (CD/DVD).
1. Turn the computer off, remove the AC/DC adapter (and battery) and turn the computer over.
2. Remove the optical device (see “Upgrading the Optical Device (Model B)” on
page 6 - 8 )
3. When the optical device is removed the secondary HDD assembly will be visible.
4. Remove screws - from the secondary HDD assembly.

RAID Hard Disks
All hard disks in a RAID
should be identical (the
same size and brand) in
order to prevent unex-
pected system behavior.
Figure 6 - 13
Secondary HDD
Assembly Screws
(Model B)
1 4
3
1 2
4