EXFO FTB/IQS-85100G Packet Blazer for FTB-500/IQS-600 - Manual (Page 128)

Test Setup - Test Configurator, Timer, and System
118 FTB/IQS-85100G
RFC 2544 - Subtests

Accuracy is the accuracy measurement in percentage of the line rate
(%), Mbit/s, or in Gbit/s. The accuracy is not based on the configured
Maximum Rate but on the Ethernet line rate. The accepted values are
as follows:

Acceptable Errors repesents the number of acceptable errors for the
test: 0 (default) to 10.

Validations represents the number of times the result should be
validated: 1 (default) to 50 times.
Interface
Speed
Max. Rate
% Mbit/s Gbit/s
40G 0.1 to 10.0
(default 1.0)
40.0 to 4000.0
(default 400.0) 0.04 to 4.00
(default 0.40)
100G 0.1 to 10.0
(default 1.0)
100.0 to 10000.0
(default 1000.0)
0.10 to 10.00
(default 1.0000)