FeiYu Tech Panda Autopilot - Manual (Page 17)

Guilin Feiyu Electronic Technology Co., Ltd
Guilin Feiyu Electronic Technology Co., Ltd http://www.feiyudz.cn [email protected]
Page 16
OPTION 1: ON BOARD AIRCRAFT DIAGRAMME
OPTION 1: ADVANTAGE

Option 1 will make on board installation easier since the RC Receiver does not need to be
installed on board.

You save on weight and installation area.

The entire radio and autopilot settings can be carried out at the Ground Station without
involving the aircraft.

Only a 6 channel receiver is required.

Also at least two of the channels require a three-position switch.
OPTION 1: WARNING

If you choose to use the 5.0 volt power from your ESC BEC, you can plug the throttle
control wire directly into the ―THR‖ port. However please ensure that your ESC internal
BEC can supply a minimum of 3.0 A current. We highly recommend that you have an
external BEC instead.

The 5.0 volt External BEC power input is connected to the +5V Pin of the P6 Port, and
the GND.
OPTION 1: Activation and Deactivation of safety feature

When the plane is controlled by the remote adapter board, it contains a communication
interruption protection function.

If the autopilot detects communication interruption lasting 10seconds or more, it will
enter into auto return mode and come safely home. This is the Default setting.

You can however deactivate this Safety Feature if you so wish. One reason to for
GPS module Data radio
AIL Servo
RUD Servo
THR Servo
ELE Servo
5V servo battery