Installation, 1 connecting the unit – Hall Research VSA-31-IP User Manual
Page 7
Model VSA-31-IP
5
2. Installation
2.1 Connecting the Unit
Refer to Figure 1 and 2 below for connector identification.
Connect the “RS232-A” and the “RS232-B” ports to the serial devices using
appropriate cables (for example, since the VSA-31 Receiver has a DB9 Male
connector, a Female/Female RS-232 NULL Modem cable should be used).
Connect the “LAN” port to a network Ethernet connection using standard CATx
cables (not supplied with unit)
Connect the “PWR” jack to the power supply (optional) or connect the unit to a Hall
Research compatible device capable of powering the unit via the RS232-B port
using the supplied RS232 Null Modem cable.
Figure 2 – End Panel Views
RS-232-A LAN
RS-232-B
PWR
STATUS
10/100
Figure 3 – Top View