Specifications - hd 13t21 std-xxx-fxxx, Specifications – Hatteland Display 13 inch - HD 13T21 STD (Widescreen) User Manual
Page 33
33
IND100129-153
Specifications - HD 13T21 STD-xxx-Fxxx
SPECIFICATIONS
Note: All specifi cations are subject to change without prior notice!
Please visit www.hatteland-display.com for the latest electronic version.
2/2
• 13.3 inch TFT Liquid Crystal Display module
• Widescreen, Aspect Ratio 16:10
• a-si TFT Active Matrix
• LED or CCFL Backlight Technology
• Digital separate synchronization
• Composite synchronization
• Synchronization on green
• Auto detects on chosen source
• Video Signal
: Analog RGB 0,7Vp-p
: Input Impedance 75 Ohm
Synchronization Range:
• Horizontal
: 24 kHz to 81 kHz
• Vertical
: 50 Hz to 75 Hz*
* 60Hz is recommended for optimal picture quality
• 355.00 (W) x 248.50 (H) x 58.00 (D) mm
• 13.98" (W) x 9.78" (H) x 2.28" (D)
• Compatible VESA mounting 75mm, 4xM4 VESA mounting, Max 8mm deep
• Built-in Console mounting 4 x M5x15mm screws
• Weight: 3.0kg / 6.6lbs
• Operating
: Temperature -15 deg. C to +55 deg. C
- Humidity up to 95%
• Storage
: Temperature -20 deg. C to +60 deg. C
- Humidity up to 95%
• IP Rating
: Protection: IP66 front - IP22 rear (EN60529)
Safety Considerations:
Even although the test conditions for bridge units provide for a maximum
operating temperature of 55°C, continuous operation of all electronic
components should, if possible, take place at ambient temperatures of only
25°C. This is a necessary prerequisite for long life and low service costs.
Resolutions:
• WVGA
: 640 x 480 (including 720 x 400)
• WSVGA
: 800 x 600
• WXGA
: 1024 x 768, 1280 x 800*
* Recommended for optimal picture quality
Power Supply:
• 2 x 24VDC
: Model HD 13T21 STD-Exx-Fxxx
Dual input, galvanic isolated, automatic switch between power source
Power Consumption:
• Operating
: 20W (typ) - 30W (max)
• DVI-I Signal IN
: 1 x 29p DVI Female (or as RGB IN with adapter)
• Touchscreen
: 1 x USB TYPE B Connector (female)
• DC Power IN
: 2 x 2-pin Terminal Block 5.08
Behind front bezel - Glass Display Control™ (GDC) IP66:
• Power On/Off, Brightness Control (-/+), Light Sensor (not visible)
• Programmable Alarm LED, Buzzer (not visible)
• Native Resolution
: 1280 x 800 (WXGA)
• Pixel Pitch (RGB)
: 0.2235 (H) x 0.2235 (V) mm
• Response Time
: 6/10ms (typical) (Tr/Tf)
• Contrast Ratio
: 800:1 (typical)
• Light Intensity (LED)
: 500 cd/m2 (typical)
• Light Intensity (CCFL)
: 400 cd/m2 (typical)
• Viewable Angle
: 70 deg (H) 60 deg (V) (typical)
• Active Display Area
: 286.08 (H) x 178.8 (V) mm
• Max Colors
: 16.7 million
TFT Technology:
Synchronization:
Physical Considerations:
Environmental Considerations:
Supported Signals:
Power Specifications:
T E S T I N G / A P P R O V A L S & C E R T I F I C A T E S
This product have been tested / type approved by the following classification societies:
IEC 60945 4th (EN 60945:2002)
IACS E10
ClassNK - Nippon Kaiji Kyokai
GL - Germanischer Lloyd
DNV - Det Norske Veritas
ABS - American Bureau of Shipping
BV - Bureau Veritas
LRS - Loyd’s Register of Shipping
EU RO MR - Mutual Recognition
CCS - China Classification Society
Signal Terminals:
User Controls:
TFT Characteristics:
Compass Safe Distance: HD 13T21 STD-xxx-Fxxx
Standard: 45cm Steering: 30cm
• Optical Bonding Technology
Factory Mounted Options:
• HD 13T21 STD-EA1-FAGP = Dual DC, GDC, Buzzer, PCTouch
• HD 13T21 STD-EA1-FOGP = Dual DC, Optical Bonding Technology, GDC, Buzzer, PCTouch
Available Standard Models:
For a full overview of typenumbers, please review the following link:
www.hatteland-display.com/pdflink/ind100780-3.php
• Projected Capacitive Touch Screen (Multitouch, USB interface)
Factory Defaults: