Step 5, Step 7, Spare parts - hawker hurricane mkiib – HITEC P-51 Mustang User Manual
Page 13: Step 6
ASSEMBLY INSTRUCTIONS - HAWKER HURRICANE MKIIB (cont.)
Step 6: Attaching the Antenna.
Insert the antenna into the mounting
groove near the rear of the fuselage.
STEP 5
Step 8: Check the Center of Gravity (CG)
Check the Center of Gravity on your model
by balancing it on your fi ngers. The CG
should be about 1 3/4 ~ 2 inches (45 ~ 50
mm) behind the leading edge of the model
as shown below. You can adjust the CG by
moving the battery forward or backwards.
STEP 7
Fuselage
59028
Main Wings
59029
Horizontal Stabilizer
59030
Vertical Stabilizer
59031
Landing Gear
59032
SPARE PARTS - HAWKER HURRICANE MKIIB
Spinner
59034
Propellor
59035
Controlling Linkage
59036
STEP 6
Step 6: Installing the Receiver and Battery
Install the receiver into the fuselage and
plug in the servo leads. Install the bat-
tery into the cavity in the front section
of the fuselage as shown above.
*WS9 9g Servo - 150mm Lead (tail)
**WS9 9g Servo - 300mm Lead (wing)
59037 *
59038 **
WBL-1200 Brushless Motor
59040
WBE-12A Brushless ESC
59039
- 13 -