Imaxrc PCard-FA - Manual (Page 2)

Using program card

Program Card can display and modify the parameter item by the 4 digits LED and 4 buttons.
When every parameter setting is done, push “write” key, all parameters can be saved into
ESC automatically. The two of all parameters can be set quantificationally.
1. Low Voltage Protection Threshold: user can set proper voltage threshold according to cell
quantity in range of 00.0-49.9V.
2. Start power: can be set in range of 00% - 29%. User can use different start power
according to the different condition. Especially be suitable for ESC for Car and high-voltage
ESC for Plane.