Imaxrc B606-AC-PRO - Manual (Page 16)

The voltage of one of the cell in the Lithium battery pack is too high. Please check the voltage
of the cell one by one.
The voltage of one of the cell in the Lithium battery pack is too low. Please check the voltage
of the cell one by one.
There is bad connection at the individual connector. Please check the connector and cables
carefully.
The internal temperature of the unit goes too high. Cool down the unit.
The processor can not continue to control the feeding current by any reason. The unit needs
to be repaired.

BATTERY VOL TAGE
CELL LOW VOL
BATTERY VOL TAGE
CELL HIGH VOL
BATTERY VOL ERR
CELL CONNECT
TEMP OVER ERR
CONTROL FAILURE
Although the charger is designed to work in a stable environment to play a role, but in use, you still need careful
maintenance, as long as these important tips to follow, that is easy and effective use of your charger.
When you start the process, especially the discharge process, the unit will become warm, please keep clear of the heat
area and do not cover it by anything when using.
Do not keep it in a environment below 5 or above 50
Use it carefully, do not use it in a wet or corrosive environment.
Keep all the inflammable volatile materials well away from operating area.
Please don’t let the charger get hurt through falling, bumping, striking, shaking, and heavy press and so on.
Safety message