D-Link DES-1226G - Manual (Page 18)

18
To restore a current settings file to the device, you must specify the backup file and click on the “Restore” button to process the setting of the
recorded file.
Figure 23. Backup Setting
Note: when restoring a recorded file, the current password will not be erased.
Reset Setting
The Factory Reset button helps you to reset the device back to the default settings from the factory. Be aware that the entire configuration will be
reset; the IP address of the device will be set to default setting of 192.168.0.1.
Figure 24. Reset Setting
Logout
When pressing the “Logout” button, you will be logged out and the Web configuration will return to the first Login page.
Figure 25. Logout
5. Technical Specifications
General
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100 BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet
Protocol CSMA/CD
Data Transfer
Rate
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-
duplex)
Gigabit Ethernet: 2000Mbps (full-duplex)
Network
Cables
10BASET: 2-pair UTP/STP Cat. 3,4,5; up to 100m
100BASE-TX: 2-pair UTP/STP Cat. 5; up to 100m
1000BASE-T: 4-pair UTP/STP Cat. 5; up to 100m (Cat. 5E
is recommended)
Fiber module: SFP(Mini-GBIC Fiber module
Number of
Ports
24 ×10/100BASE-TX Auto-MDIX STP ports
2 × 1000BASE-T Auto-MDIX STP ports
2 × SFP(Mini GBIC) fiber slot
Physical and Environmental