Lab.gruppen LM 44 - Manual (Page 45)

Front Panel Interface
39
Lake LM Series Operation Manual Rev 1.2.8
Figure 6-24: GPO Configuration
Table 6-4 lists the options available for General Purpose Output (GPO).
Acting on State when Closed
Protective Mute State
1. Muted
2. Unmuted
Standby State
1. Standby
2. On
Fault
1. No Fault
2. Any Fault
Ready
1. Ready
2. Not Ready
No Indication -
Table 6-4: GPO Options
Factory Reset and Soft Reset clear the protective
mute state.
Two input options (GPI) and two output options (GPO) may be set at any one time. The default GPIO
configuration is shown in Table 6-5. The current state (open/closed) is reported for all GPIO settings on the
front panel and in the Lake Controller software.
GPIO # Default Option
GPI 1 No Action
GPI 2 No Action
GPO 1 Standby State
GPO 2 Fault
Table 6-5: Default GPIO Configuration