Laerdal Bleeding Trauma Modules - Manual (Page 6)

Attaching Modules to Manikin:
Arms:
Laerdal Recommends:
Use existing hardware on
manikin to attach arm and
leg trauma modules.
To attach arms: (Photo 1)
1. Remove chest skin and chest plate
from manikin.
2. Disconnect cable from BP arm.
3. Remove wingnut from hardware.
4. Locate hole in shoulder.
5. Remove arm plug
6. Remove hardware.
7. Place arm module in hole in
shoulder.
8. Reinstall hardware.
9. Replace chest plate and chest skin
in manikin.
To remove arm, reverse procedure.
Thighs:
To attach thighs:
1. Remove abdominal module from manikin.
2. Remove thigh pad from leg.
3. Locate hole in pelvis where leg is attached.
4. Remove hardware.
5. Insert module into hole in pelvis. Bolt is cast into thigh
modules. (Photo 2)
6. Twist into place.
7. Reattach hardware on inside of manikin.
8. Replace abdominal module on manikin.
To remove legs, reverse procedure.
Photo 1
Photo 2
38 15 50 6 Laerdal