Laerdal Crash Kelly User Manual
Page 6
Legs:
A 6 inches long bolt, a spring, a large washer, a small washer
and a wing nut attach legs.
To attach:
1. Remove belly plate from manikin.
2. Locate hole in hip.
3. Remove thigh injection pad.
4. Slide spring and then small washer over bolt.
5. Insert bolt through hole in pelvis.
6. Slide large washer and then wing nut over bolt.
7. Use a screwdriver to drive bolt into wing nut. (Fig. 2)
To remove legs, reverse procedure.
Instructions for Use:
Intubation:
For intubation, MPL recommends:
a. Endotracheal tube size 7.5 ID or smaller
b. Silicone spray or liquid soap
c. 10 ml syringe
d. Laryngoscope blade, sizes #3 or #4 straight or
curved blade
e. Laryngoscope handle
Laerdal Recommends
Intubation tubes and airway passages should be sprayed
with Manikin Lubricant or lubricated with liquid soap prior
to intubation.
Fig. 2
201-10001
Laerdal
6