Datamax PE - Manual (Page 53)

PE Series Operator’s Manual 43
5.2 Media Width Adjustment
The printer is able to use a wide variety of media types, widths and
thickness. The printhead mechanism has a feature that allows the
user to make a leveling adjustment. This adjustment is required
when using labels that are less than 4” wide.
Figure 5-1 Adjusting Media Width
Load the Printer with the chosen media. Begin printing your label
format. Rotate the Head Level Adjustment Knob, (see Figure 5-1)
clockwise until the print quality along edge starts to lighten. Finally,
rotate the knob back just enough to achieve uniform print quality
across the label, see below.
Print beginning to lighten.
Proper final adjustment.
Figure 5-2 Example of the Media Width Adjustment