Ten commandments of archery safety – Martin Archery Martin Compound Bow User Manual

Page 23

Advertising
background image

Warranty limitations are as follows:

1. If bow shows signs of misuse, alteration, or mishandling this warranty will be void. Use of ar-

rows weighing less than five (5) grains per pound of draw weight is considered misuse and will

void this warranty.

2. Claimant must be the original purchaser. This warranty is not transferable.

3. All returns to Martin Archery Inc. must be pre authorized. Owner must contact Martin Archery,

Inc. at (509) 529-2554 prior to shipping in order to obtain a Return Authorization number.

4. All accessory items must be removed from the bow prior to shipping. Martin Archery, Inc. will

not be responsible for damage or loss of any accessory item left on the bow.

5. Warranty is not effective unless a copy of the dated sales receipt accompanies the bow.

6. This warranty gives you specific legal rights. You may also have other rights which vary from

state to state.

* This policy is subject to change and/or cancellation at the discretion of Martin Archery, Inc.

* After acquiring a Return Authorization number, send bow to:

Martin Archery, Inc.

3134 W. highway 12

Walla Walla, WA 99362

19

Never -

“Dry fire" your bow (shoot it without an arrow.) This will result in

damage to your bow and/or possible injury.

Never -

Let anyone draw or shoot your bow if their draw length is longer than

yours. Over drawing of the bow can cause cable damage.

Never -

Draw, aim, or shoot your bow unless you are sure that the line of fire is

clear. Remember, once an arrow is fired it cannot be recalled.

Never -

Shoot an arrow that is less than five grains per pound. For example, an

80# bow requires a minimum of 400 grains of arrow weight. Less than

five grains per pound of arrow weight simulates a dry fire effect and may

damage your bow.

Never -

Expose your bow to extreme heat. Excessive heat, such as your car on a

hot day, could lead to limb failure and premature wearing of the string harness.

Always -

Check all of your arrow shafts and nocks upon removal from the target.

If the arrows show defects or broken nocks, do not shoot them.

Always -

Carefully inspect your bow after each use. Be sure all screws are

snug and accessories are tight. Inspect your string and cables for wear or damage.

Always -

Draw your bow while pointing it at the target. A premature release of the

arrow can be very dangerous. If you cannot draw your bow while

pointing it at the target without excessive movement, lower the peak weight

of your bow until you can draw smoothly and correctly. Over time you will build up strength,

and will be able to return to the higher weight.

Always -

Draw your bow with an arrow on the string while keeping it pointed in a

safe direction. Never draw your bow with a release aid without an arrow.

A release aid failure could result in the dry fire of your bow.

Always -

Back your limb bolts off five full turns from the riser before putting it in a bow press. Only let a

qualified professional or a Martin authorized dealer

put your bow in a bow press. Inexperienced use of a bow press or a

T-stringer can result in damage to your bow. The type of damage caused

by a press is not covered under the Martin Archery bow warranty.

TEN COMMANDMENTS OF ARCHERY SAFETY

Advertising