Playback control commands, Play [zone, Playseq [zone] [sequencenumber – Qsonix Integration User Manual
Page 7: Stop [zone, Pauseset [zone #] [setting, Pausetoggle [zone, Next [zone #] {trackcount, Play, Playseq, Stop
Qsonix Integration Guide
Page | 7
Playback Control Commands
Play
[Zone]
DESCRIPTION
Plays the currently selected track for the specified [Zone}.
PARAMETERS
Zone #
Specifies which zone should be acted upon. Must be 0 or a valid zone number.
PlaySeq
[Zone] [SequenceNumber]
DESCRIPTION
Skips playback to the specified sequence number in the play queue.
PARAMETERS
Zone #
Specifies which zone should be acted upon. Must be 0 or a valid zone number.
SequenceNumber Playback will jump to this sequence number in the playback queue for the zone
specified. Tracks in the playback queue are numbered sequentially starting at 0
(the first track is sequence number 0).
Stop
[Zone]
DESCRIPTION
Stops playback for the specified [Zone}.
PARAMETERS
Zone #
Specifies which zone should be acted upon. Must be 0 or a valid zone number.
PauseSet
[Zone #] [Setting]
DESCRIPTION
Sets the pause state of playback for the specified Zone.
PARAMETERS
Zone #
Specifies which zone should be acted upon. Must be 0 or a valid zone number.
Setting
Must be ON or OFF to indicate the new state of pause
PauseToggle
[Zone #]
DESCRIPTION
Toggles between paused and un-paused state for playback for the specified [Zone}.
PARAMETERS
Zone #
Specifies which zone should be acted upon. Must be 0 or a valid zone number.
Next
[Zone #] {TrackCount}
DESCRIPTION
Skips playback forward by {TrackCount} tracks for the specified [Zone}.