Attaching the ladder, Step 1, Step 2 – RAVE Sports Bongo 10 Bouncer Water Park User Manual
Page 9: Step 3
Attaching the Ladder
Step 1
The ladder consists of two pieces: a ladder with
straps and a molded plastic ladder stabilizer.
Orient the stabilizer on the notched side of the top
two ladder steps and the curved portion is facing
upwards towards the top of the ladder. While
maintaining this orientation, flip the ladder upside
down to expose the underside of the steps.
Step 2
Line up the large opening of the keyhole slots
with the four bolts on the underside of the top
two steps.
Step 3
Slide the stabilizer towards the ladder to fully
engage the bolts in the narrow end of the slots.
Tap the stabilizer with your hand to ensure the
bolts are fully engaged in the slots.
Note: If the stabilizer feels loose after
mounting, tighten the bolts slightly leaving
minimal clearance between the bolt flange and
the plastic stabilizer. This slight clearance will allow the stabilizer to
be easily removed by hand (without tools) for storage.
To remove stabilizer, simply slide in opposite direction.
Curved portion
8