SkyRC Quattro B6AC - Manual (Page 19)

BATTERY MEMORY SET
DSCH CURRENT
2.2A
Set the discharge current, which can be adjusted(0.1A-2.0A,
each port).
DSCH VOLTAGE
3.0V/CELL
Set the discharge voltage, which can be adjusted(3.0V/CELL-
3.3V/CELL).
TVC=YOUR RISK
4.20V Set the terminal voltage, which can be adjusted(4.18v-4.30v).
DEC INC
DEC INC
DEC INC
DEC INC
DEC INC
DEC INC
SAVE PROGRAM
SAVE
SAVE PROGRAM
ENTER
Save the program set by pressing the Start/Enter button for more
than three seconds.
DEC INC
ENTER
START
＞3 seconds
BATT MEMORY 【1】
LiPo 7.4V(2S)
This screen indicate the saved profile.
BATT MEMORY 【1】
C:4.9A D:2.2A
ENTER CHARGER
LOAD……
This screen indicates that the charge profile is being loaded.
next flash
DEC INC
BATT VOLTS
7.4V(2S)
Set the voltage and number of cells, along with the normal voltage
(1-6S).
CHARGE CURRENT
4.9A Set the charge current, which can be adjusted(0.1-6.0A).
DEC INC
DEC INC
DEC INC
DEC INC
Once you've saved a charge profile, you can load those settings to
use later. To load a memory, you have to press the Start/Enter
Button for more than 3 seconds. Otherwise you only enter the
setting mode.
TEMPERATURE
CUT-OFF 50C
Set the cut-off temperature, which can be adjusted(20C-80C).
DEC INC
DEC INC