SkyRC RS16 180W/16A Balance Charger/Discharger - Manual (Page 7)

WARNING
This charger is powered by a 11-18V DC power source. There are two DC
input sockets, one is used for the connection of DC power cord (XT60),
locating on the right of the charger and the other is used for docking into the
Efule 230W/13.8V Power Supply.
Please connect the charger by supplied DC input cable (XT60 connectors
attaching to charger and banana plugs attaching to power supply.)
You could also connect the charger with eFule 230W/13.8V Power Supply
by a pair of dual banana plugs,
4mm Bullet Connectors
plugging to eFUEL power
supply directly
Always connect the red (+) positive lead from your charger to the red (+)
positive terminal on the power supply, and the black (+) positive lead from
your charger to the black (+) positive terminal on the power supply. To utilize
the charger’s absolute maximum power capabilities, the DC power source
must be capable of delivering at least 17 amps while maintaining 12V DC.
Follow the correct polarity when connecting the power supply and
the device.
Do not let the ends of the positive and negative wires touch
each other.
XT60 Connectors
plugging to charger directly
RacingStar RS16
Charger
eFUEL 13.8V/17A
Power Supply.
To avoid damage to both the power supply and the charger:
Dual Banana
Plugs
CONNECTION CONNECTION