SpectraCal Flanders Scientific Monitor - Manual

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
Flanders Scientific Monitor
Calibration 3D LUTs
CalMAN Setup Guide
CalMAN Display Calibration Software can automatically create optimized calibration 3D LUTs for
Flanders Scientific monitors equipped with the FSI Color Fidelity Engine (CFE or CFE2). CalMAN creates a
custom LUT file, optimized to calibrate the FSI monitor to the selected performance standard. The
custom LUT file can then be loaded into the FSI monitor and accessed in the monitor’s User1, User2, or
User3 Color Space selections.
Required CalMAN Workflow:

Color Cube (3D LUT)
Required FSI Monitor Firmware:

Version 9.53-1907 or newer
Firmware updates:
http://www.flandersscientific.com/index/firmware.php
FSI Monitor Control Connection:

FSI-supplied USB to RJ45 update cable connected to FSI monitor GPI port.
Update cable available from
ShopFSI.com .
FSI Monitors with Calibration LUTs:
FSI models equipped with the Color Fidelity Engine are capable of loading custom calibration 3D LUTs.

First generation FSI CFE monitors utilize a .dat LUT format for calibration 3D LUTs.
First generation CFE monitors include:
-LM-2461W
-LM-2460W
-CM-170W

Second generation FSI CFE2 monitors, running firmware version 9.53-1935 or later, utilize a .cfe
LUT format for calibration 3D LUTs.
Second generation CFE2 monitors include:
-CM171
-CM172
-CM240
-CM250
-CM320TD
-CM500TD
-BM210
-BM230
Note: CFE2 monitors include both a Calibration LUT (.cfe) and a DIT LUT (.dat).
The CalMAN Color Cube workflow creates either .dat or .cfe 3D LUT files for compatibility with the
above FSI CFE and CFE2 monitors.