Spectrum Controls 140 ACI 051 00sc - Manual (Page 48)

Installation Instructions
32-Channel Analog Input Module
Quantum Series 140 AxI 05x 00sc
43
Temp Voltage Mode Current Mode
25°C Typical ±0.03% ± 6 mV ±0.05% ±10µA
60°C Max ±0.05% ±10mV ±0.10% ± 20µA
+ Note: Accuracy calculations are based on the full scale current and voltage input range. These are
0 to 20 mA and ±10V respectively.
6.6 Range and Data Format Selection
Each of the module’s input ranges can be viewed in one of the four data
in formats below. The table shows the minimum and maximum values
are equal to the under range and over range trip points.
Format: Range: Min: Max:
Signed 15 Bit -10 to +10V -32,767 +32,767
Signed 15 Bit 0 to +10V -32,767 +32,767
Signed 15 Bit +1 to +5V -32,767 +32,767
Signed 15 Bit +0 to +5V -32,767 +32,767
Signed 15 Bit +0 to +20mA -32,767 +32,767
Signed 15 Bit +4 to +20mA -32,767 +32,767
Unsigned 16 Bit -10 to +10V 0 +65,535
Unsigned 16 Bit 0 to +10V 0 +65,535
Unsigned 16 Bit +1 to +5V 0 +65,535
Unsigned 16 Bit +0 to +5V 0 +65,535
Unsigned 16 Bit +0 to +20mA 0 +65,535
Unsigned 16 Bit +4 to +20mA 0 +65,535
Unsigned 12 Bit -10 to +10V 0 +4,095
Unsigned 12 Bit 0 to +10V 0 +4,095
Unsigned 12 Bit +1 to +5V 0 +4,095
Unsigned 12 Bit +0 to +5V 0 +4,095
Unsigned 12 Bit +0 to +20mA 0 +4,095
Unsigned 12 Bit +4 to +20mA 0 +4,095
10,000 Count DVM -10 to +10V -10,000 +10,000
10,000 Count DVM 0 to +10V 0 +10,000
10,000 Count DVM +1 to +5 V +1,000 +5,000
10,000 Count DVM +0 to +5V 0 +5,000
10,000 Count DVM +0 to +20mA 0 +2,000
10,000 Count DVM +4 to +20mA +400 +2,000