StorCase Technology DS321 User Manual
Page 17
DS321 User's Guide - Rev. B00
StorCase Technology, Inc.
Installation
9
0836
2 Slide the cover
towards the back
of the carrier
1 Insert this end
into the carrier
first
3 Secure with #6-32
Phillips Flat Hd.
screws (2 Total)
Figure 5: Drive Cover Installation
7.
The DE110 drive carrier is now ready to be inserted into the Data Silo.
NOTE:
The lock on the DE110 carrier functions as a lock and a DC power
switch for the carrier unit. The lock must be engaged in order to
supply power to the carrier and installed drive.
8.
Reboot the computer. The new disks is now ready for use, although it may have
to be formatted or initialized prior to use with your operating system and applications
software.
WARNING:
Unlocking the carrier unit switches DC power OFF to the drive.
Since disk drives require a short amount of time to spin down, allow
about 15 seconds before pulling the carrier unit out of the receiving
frame to avoid possible damage to the drive.
NOTES:
Disable FireWire device on host computer desktop before turning OFF
power (simply right-click on the Unplug/Eject Hardware Icon loca-
ted in the System Tray and "disconnect").
For Microsoft
®
Windows
®
2000 applications, DO NOT turn on immedi-
ately after turning off power. Wait at least 15 seconds before turning
power back on.