WebDT DT512T User Manual
Page 2
DT512
ENGLISH
2
3
ENGLISH
Packaging
The DT512 is packaged with recyclable materials and designed for maximum protection in
•
transportation and handling.
When possible, please save the packaging carton and protective inserts for re-use if there is ever
•
a need to ship the DT512.
I/O Panels
Side I/O Panel
The DT512 has two USB 2.0 ports located and easily
accessible along the right edge of the display unit.
Lower I/O Panel
The DT512 has a comprehensive set of I/O ports. The
following ports are located along the lower rear edge of the
display unit.
RS232 COM port
1.
Audio-out jack
2.
Line-in jack
3.
Microphone-in jack
4.
Ethernet port (RJ45)
5.
18.5V/ 3.5A DC-in jack
6.
Lower Panel Function Buttons
The bottom of the DT512 features power, utility, soft keyboard and programmable buttons.
Power button
7.
Programmable buttons
8.
Scanner port
9.
Rear Mounting
The DT512 is designed to be secured to 75mm x 75mm VESA-compliant mounting arms or stands.
This is accomplished by detaching the standard metal base from the rear of the display unit. The
75mm x 75mm VESA-compliant mounting holes at the rear of the device will mate with VESA
mounts or arms to meet the requirements of the deployment.
Unscrew the four screws attaching the 100mm
1.
x 100mm VESA-compliant adapter to the
display, then remove the adapter.
Attach the new 75mm x 75mm VESA-compliant
3.
mounting device or stand to the display.
The display without the adapter.
2.
The display successfully mounted onto a
4.
VESA-compliant mounting arm.
7
8
1
2 3
9
4
5 6
May be configured to perform different functions, depending on the software operating
•
system.
Depending on the OS, a brief, firm push will trigger software-enabled entry into Shutdown
•
or Standby modes. Push in similar manner to Restart or to exit Standby mode.
Push and hold for over 4 seconds to forcefully shut down the device.
•
This method of powering off should only be used when proper shutdown through software
•
is not possible.
The four buttons are intended to be user programmable via software in applicable operating
systems.