Abbott Freestyle Freedom Lite - Manual (Page 27)

23
Performing a Control Solution Test
1.
Check control solution expiration date .
2.
Remove test strip from vial .
3.
Insert test strip to turn meter on .
Note: The meter turns off after 2 minutes of inactivity .
Remove and reinsert the unused test strip to restart
the meter .
If the meter does not turn on go to Troubleshooting section .
IMPORTANT: Do not use control solution past expiration date . Discard
control solution 3 months after opening or on the expiration date
printed on the bottle whichever comes first . (Example: open April 15,
discard July 15; write the discard date on the side of the bottle .)
Top
Printed side up
Sample areas
Contact Customer Care Toll Free at 1-888-522-5226 www.MyFreeStyle.com
English