Vehicle data, General notes, Technical data – Mercedes-Benz 2013 CLA Class User Manual
Page 345
At temperatures below freezing:
X
Fill the washer fluid reservoir with a mixture
of water and washer fluid, e.g. MB Winter-
Fit.
Adapt the mixing ratio to the outside temper-
ature.
R
Down to Ò10 †: mix 1 part MB WinterFit to
2 parts water.
R
Down to Ò20 †: mix 1 part MB WinterFit to
1 part water.
R
Down to Ò29 †: mix 2 parts MB WinterFit
to 1 part water.
i
Add washer fluid concentrate, e.g. MB
SummerFit or MB WinterFit, to the washer
fluid all year round.
Vehicle data
General notes
Please note that for the specified vehicle
data:
R
the heights specified may vary as a result
of:
-
tyres
-
load
-
condition of the suspension
-
optional equipment
R
items of optional equipment increase the
unladen weight and reduce the maximum
payload. The unladen weight is specified in
accordance with EC directives and
includes:
-
driver (68 kg)
-
luggage (7 kg)
-
all fluids (fuel tank 90% full)
R
vehicle-specific weight information can be
found on the vehicle identification plate
(
R
only for certain countries: you can find vehi-
cle-specific vehicle data in the COC docu-
ments (CERTIFICATE OF CONFORMITY).
These documents are delivered with your
vehicle.
Dimensions and weights
Model
: Opening
height
CLA 180
CLA 200
CLA 220 CDI
1745 mm
CLA 250
1749 mm
Missing values were not available at the time
of going to print.
All models
Vehicle length
4630 mm
Vehicle width
including exterior
mirrors
2032 mm
Vehicle width
excluding exterior
mirrors
1777 mm
Wheelbase
2699 mm
Maximum roof load
Maximum boot load
100 kg
Vehicle data
343
Technical data
Z