Tyre pressure loss warning system, Wheels and tyres, Tyre pressure – Mercedes-Benz 2012 A Class User Manual
Page 325
i
The tyre pressure values given for low
loads are minimum values which offer you
good ride comfort characteristics.
However, you can also use the values given
for higher loads. These are permissible and
will not adversely affect the running of the
vehicle.
Tyre pressure loss warning system
Important safety notes
While the vehicle is in motion, the tyre pres-
sure loss warning system monitors the set
tyre pressure using the rotational speed of
the wheels. This enables the system to detect
significant pressure loss in a tyre. If the speed
of rotation of a wheel changes as a result of
a loss of pressure, a corresponding warning
message will appear in the multifunction dis-
play.
The tyre pressure warning system does not
warn you of an incorrectly set tyre pressure.
Observe the notes on the recommended tyre
pressure (
Y
page 321).
The tyre pressure loss warning system does
not replace the need to regularly check your
vehicle's tyre pressures, since an even loss of
pressure on several tyres at the same time
cannot be detected by the tyre pressure loss
warning system.
The tyre pressure monitor is not able to warn
you of a sudden loss of pressure, e.g. if the
tyre is penetrated by a foreign object. In the
event of a sudden loss of pressure, bring the
vehicle to a halt by braking carefully. Avoid
abrupt steering manoeuvres.
The function of the tyre pressure loss warning
system is limited or delayed if:
R
snow chains are fitted to your vehicle's
tyres.
R
road conditions are wintry.
R
you are driving on sand or gravel.
R
you adopt a very sporty driving style (cor-
nering at high speeds or driving with high
rates of acceleration).
R
you are towing a very heavy or large trailer.
R
you are driving with a heavy load (in the
vehicle or on the roof).
Restarting the tyre pressure loss warn-
ing system
Restart the tyre pressure loss warning system
if you have:
R
changed the tyre pressure
R
changed the wheels or tyres
R
fitted new wheels or tyres
X
Before restarting, make sure that the tyre
pressures are set properly on all four tyres
for the respective operating conditions.
The recommended tyre pressures can be
found in the table on the fuel filler flap.
The tyre pressure loss warning system can
only give reliable warnings if you have set
the correct tyre pressure. If an incorrect
tyre pressure is set, these incorrect values
will be monitored.
X
Observe the notes on tyre pressure
(
Y
page 321).
X
Make sure that the key is in posi-
tion
2(
Y
page 143) in the ignition lock.
X
Press the = or ; button on the steer-
ing wheel to select the
Service
menu.
X
Press the 9 or : button to select
Tyre pressure
.
X
Press the a button.
The
Run Flat Indicator active
Restart with OK
message appears in the
multifunction display.
If you wish to confirm the restart:
X
Press the a button.
The
Tyre press. now OK?
message
appears in the multifunction display.
X
Press the 9 or : button to select
Yes
.
X
Press the a button.
The
Run Flat Indicator restarted
message appears in the multifunction dis-
play.
Tyre pressure
323
Wheels and tyres
Z