Subaru 2007 Impreza WRX User Manual

Page 46

Advertising
background image

Black plate (47,1)

北米Model "A1920BE-B" EDITED: 2006/ 9/ 19

tion switch is turned to the

“ON” position.

The following components are monitored
by the indicator:
. Front sub sensor (Right-hand side)

. Front sub sensor (Left-hand side)

. Airbag control module (including im-
pact sensors)
. Frontal airbag module (Driver’s side)

. Frontal airbag module (Front passen-
ger

’s side)

. Side airbag sensor (Center pillar right-
hand side)
. Side airbag sensor (Center pillar left-
hand side)
. Side airbag module (Driver’s side)

. Side airbag module (Front passenger’s
side)
. Seatbelt pretensioner (Driver’s side)

. Seatbelt pretensioner (Front passen-
ger

’s side)

. Seatbelt buckle switch (Driver’s side)

. Seatbelt buckle switch (Front passen-
ger

’s side)

. Driver’s seat position sensor

. Front passenger’s seatbelt tension
sensor
. Front passenger’s occupant detection
system weight sensor
. Front passenger’s occupant detection
control module

. Front passenger’s frontal airbag ON
and OFF indicator
. All related wiring

WARNING

If the warning light exhibits any of
the following conditions, there may
be a malfunction in the seatbelt
pretensioners and/or SRS airbag
system. Immediately take your vehi-
cle to your nearest SUBARU dealer
to have the system checked. Unless
checked and properly repaired, the
seatbelt pretensioners and/or SRS
airbag will not operate properly in
the event of a collision, which may
increase the risk of injury.
. Flashing or flickering of the warn-

ing light

. No illumination of the warning

light when the ignition switch is
first turned to the

“ON” position

. Continuous illumination of the

warning light

. Illumination of the warning light

while driving

& System servicing

WARNING

. When discarding a seatbelt re-

tractor assembly or scrapping
the entire vehicle damaged by a
collision, consult your SUBARU
dealer.

. Tampering with or disconnecting

the system

’s wiring could result

in accidental activation of the
seatbelt pretensioner and/or
SRS airbag or could make the
system inoperative, which may
result in serious injury. The wir-
ing harnesses of the seatbelt
pretensioner and SRS airbag
systems are covered with yellow
insulation and the connectors of
the system are yellow for easy
identification. Do not use electri-
cal test equipment on any circuit
related to the seatbelt preten-
sioner and SRS airbag systems.
For required servicing of the
seatbelt pretensioner, see your
nearest SUBARU dealer.

Seat, seatbelt and SRS airbags

1-21

– CONTINUED –

1

Advertising