ABtUS CAT-GA11MT/AP3 - Manual (Page 2)

User Operation Guide
* Specifications are subject to changes without notice.
PRODUCT DESCRIPTION
The ABtUS CAT-GA/AP3 Series is a CAT-5 extender that accepts long distance transmissions
of RGB video with stereo audio on any CAT-5e UTP, CAT-5e FTP or CAT-6 twisted pair up
to 305meter
The ABtUS CAT-GA111R/AP3, a receiver that accepts signals resolution up to 1920 x 1200
which comes with a built-in Enhanced Skew Compensation as well as Level and EQ
Adjustments, giving the receiver the ability to enrich the brightness and sharpness of the
video image.
· Output: RGBHV video on female 15-pin HD connector, stereo audio on 3.5mm mini-audio jack and One RJ45
· Receives computer video and stereo audio up to 1000 feet (305 meters) over CAT-5e UTP, CAT-5e FTP or
CAT-6 UTP cable.
· Variable Level and EQ controls
· Digital Skew Compensation Control allows a fine adjustment for the delay in each color
· Supports resolutions from VGA (640 x 480) to WUXGA (1920 x 1200)
· Works well with monitors, projectors, HDTV and flat panels display
FRONT PANEL VIEW (RECEIVER)
PRODUCT HIGHLIGHTS
1) Set-up Mode:
When DC power is plug in R.G.B LED will blink 3
time and R-LED will stay "ON". Press "Select" to
select R, G or B and "<" or ">" button for adjustment.
If NO buttons is press within 60sec. Unit will stored
and go into "Panel Lock Mode".
2) Re-entering of Set-up Mode:
Press and hold "Select" button for 3 sec. them
follow step (1) for the adjustment. Unit will over
write setting when NO buttons is press for 60sec.
SKEW CONTROL
ITEM
1. EQ Adjustment
2. Gain Adjustment
3. R, G, B (LED, selection Indication)
4. Select Button (Selection of R, G or B
for Slew adjustment)
5. Color Delay Adjustment “Left”
6. Color Delay Adjustment “Right”
DESCRIPTION
1 2 4 5 6 3
Model: CAT-GA111R/AP3
Typical Application
CAT-GA SERIES
GA Series
Configuration Diagram
OVERVIEW PANEL
CAT-GA11MT/AP3 CAT-GA11R/AP3
(NO Loop Out)
CAT-GA111R/AP3
(WITH Loop Out)