ABtUS AVS-SCL402/A - Manual (Page 2)

User Operation Guide
PRODUCT HIGHLIGHTS
PRODUCT DESCRIPTION
The ABtUS AVS-SCL402/A is a Pro-AV Scaler switcher that takes up to 8 different Video Input formats. It
scales any Composite, s-Video (Y/C), component video (YUV) or computer graphics video signal up or down
to a selectable graphics output resolution, and provide glitch-free switching between sources through an image
capturing memory switching technology.
· Motion adaptive de-interlacing/interlacing
· 3D Noise reduction (NTSC/PAL)
· 3D Comb filter (NTSC/PAL)
· Film-mode detection 2:2/3:2 pull down
· Support Remote control
FRONT PANEL VIEW
· Support RS232 control interface
· Image capturing memory switching technology
· Support friendly Windows AP
· OSD full function control
ITEM DESCRIPTION
1. POWER Push Power to trun ON or OFF system
2. INPUT SELECT Input Signal:
(1). CV : Signal input from Composite Video and Audio
(2). YC : Signal input from S-Video and Audio
(3). YUV : Signal input from Component Video and Audio
(4). VGA : Signal input VGA and Audio input
3. OUTPUT SELECT Select output resolution
Select able range: 640x480, 800, 600, 1024x768, 1280x1024 @60Hz
4. FUNCTION KEY (1). Enter or leave OSD menu
(2). Volume control when not in OSD. When in OSD menu,
it is used to changes selected item
(3). When in OSD menu, it is used to scroll up or down.
ITEM DESCRIPTION
1. RS-232 I/O port: for remote controlling
2. VGA/Audio IN
3. VGA/Audio OUT
4. Component Video IN (Y, Cb, Cr)
5. Component Audio IN
ITEM DESCRIPTION
6. Composite Video/Audio IN
7. S-Video/Audio IN
8. DC Power IN (Before plugging in the power,
please check if the power is : 12 V DC 3Amp)
1 2 3 4 5 6 7 8
BACK PANEL VIEW
1 2 3 4
ENTER
* Specifications are subject to changes without notice.
RS-232 PROTOCOL AND CONTROL CODE
02 07