Alto Professional Live Drive App - Manual (Page 18)

18
EQ Page
This page lets you set your own EQ curve,
which will be applied when the loudspeaker's or
subwoofer's DSP is set to Custom.
Tap and drag the Low, Mid, or High fader to
adjust the level of the bass, mid-range, or treble
frequencies, respectively. The curve on the grid
will adjust accordingly. Double-tap a fader to
reset it to 0 dB.
The Peak indicator will light up
when the signal output level
reaches its maximum playback level. If this
indicator is lit continuously and if the
loudspeaker's or subwoofer's output sounds
distorted, (A) reduce the fader's level in the app,
(B) reduce the loudspeaker's or subwoofer's
volume control setting (on its rear panel), or (C)
reduce the output level from your mixer.