Denon AVR-2807 - Manual

AVR-2807
A/V Surround Receiver
The AVR-2807 is Denon's latest addition of versatile A/V Receivers,
which incorporate all current surround formats and enhanced installation
flexibility, all with great simplicity of setup and operation.
Audio section
■ Full discrete 7-channel high power amplifier
Front 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Center 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround back 110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
■ Latest 32-bit floating point DSP for the decoder
• 24-bit/192-kHz D/A converter
• 96kHz A/D converter
■ 'AL24 Processing Plus,' for high sound quality
■ Digital interface receiver supporting 24-bit/192-kHz signals
■ Large-output power amp section and power supply configuration,
for stable high-power output
■ Stable power supply for high-quality sound and picture playback
■ Pure Direct mode, for the pure enjoyment of music in high-quality sound
■ Supports the most advanced surround playback formats
• Dolby Digital EX • Dolby Digital • Dolby Pro Logic IIx
• DTS-ES • DTS 96/24 • DTS Neo:6 • DTS
■ Configurable surround back amplifiers
• Multi-zone system: a 5.1-channel theater in the main room and a stereo
environment in a second room.
• "Bi-amp" system:
Front (L/R) channels are bi-wired in a 5.1-channel theater to
improve playback quality in the front for enhanced listening enjoyment.
Video section
■ HDMI digital video interface supporting high-quality video of 1080p (*1)
The AVR-2807 has HDMI digital video interface terminals (2 inputs and 1 output) that
can be switched for high-resolution 1080p video signal transmission. These HDMI
terminals also support digital input of multi-channel audio signals.
*1) Version 1.1 compliant. Since HDCP is also supported, video cannot be viewed on a non-HDCP display
connected to the AVR-2807; please connect a HDCP-compliant display when viewing video material.
■ Video Up/Down conversion capable of output to HDMI
The AVR-2807 includes a video up/down conversion function that allows the unit to be
connected to the video monitor via a single cable regardless of the video input signal's
format as follows:
1) Composite video signals are converted to HDMI (*2), component video, & S-video;
2) S-video signals are converted to HDMI (*2), component video, & composite video;
3) Component video signals are converted to HDMI (*2), composite video (*3), & S-video (*3).
*2. I/P conversion from 480i/576i to 480p/576p
*3. Down-conversion from component video to composite or S-video applies only to 480i input signals.
■ High-speed, high-accuracy 12-bit/216-MHz Video DAC
■ I/P conversion from 480i to 480p ( When a 480i/576i signal is input from a
Composite Video, S-Video, or Component terminal, it should be output from the
HDMI terminal.)
■ 3 Sets of Component Video Inputs
■ High Definition Quality Video Switching
■ Composite and S-video signal processing
The AVR-2807 uses a time base corrector (TBC) in converting composite video & S-video
signals to component video to suppress jitter in the video signal during playback.
Connectivity/ Expandability
■ Variable subwoofer crossover switching
(40/60/80/90/100/110/120/150/200/250Hz)
■ ASD-1R iPod® Control Dock (option): Supports iPod play-
back when connected to the AVR-2807
iPod (*4) playback can be enjoyed through the AVR-2807 when the
ASD-1R, Denon's original iPod Control Dock (sold separately), is
connected to the dedicated control terminal of the AVR-2807. The
iPod can also be controlled via the remote controller supplied with
the AVR-2807.
*4) Supports 3rd-generation and later iPods equipped with a Dock connector. Some functions may not work
depending on the generation of the iPod and the version of the software..
■ New Auto Set-up and Room EQ, featuring MultEQ from Audyssey,
for overall listening area support using supplied microphone
■ Room EQ Memory
Black version is also available.
AVR2807_E3.qxd 06.2.23 4:38 PM Page 1